A Step-By-Step Guide to Making Chair Covers without Sewing
How to make chair covers without sewing? Even if you lack sewing capabilities, you can still make a chair cover. Chair coverings don’t have to cost a lot of money to produce since you can make them yourself. The inexpensive cost of canvas and draperies allows you to save a lot of money.
It’s a simple and painless procedure. You may typically replace your chair coverings if you’ve become tired of the way they appear. The latest idea is to make chairs without stitching, which is great if you have old ones that need a facelift. It’s easy to make chair coverings if you learn how. Professionals aren’t necessary for this task. You don’t even have to leave your home to accomplish it.
Table of Contents
How to Cover a Chair With Fabric Without Sewing
Making chair coverings without sewing is the topic of this essay. Straight chairs and armchairs will be our focus. In the end, you’ll be able to take care of your seats whenever you need to.
Steps To Take Are Listed Below: We will discuss about the making of covers for two different kinds of Straight Chairs and Armchairs in this article.
Armchairs: How To Make Chair Covers Without Sewing
To manufacture armchair coverings, just follow these easy instructions.
The following are things you’ll need:
- A measuring tape
- Scissors
- Fabric
- Pins with safety clasps
- Cardboard/PVC
- Pins for reupholstery
Steps To Follow: How To Make A Chair Slipcover Without Sewing
- Measuring the length is the first stage in making armchair cushion coverings. Starting from the floor, take the seat dimensions using your tape measure. Ascend the Chair and wrap your arms around it. Begin from the rear of the room and work your way toward the chair. Record your weight and height, and don’t forget to do so. To avoid inaccurate measurements, it is also important to follow the chair’s curves. Add at least ten inches to the length of the cloth required to reach the desired length.
- To begin, measure the chair’s left and right sides. Take the measurements starting from the floor and going up and over the arm on the left. Starting from the floor, the right side proceeds up, over, and around the chair. Note down your measurements one more time. To prevent taking incorrect measurements, stick to the chair’s curves. To get the correct length of cloth, multiply ten by 10.
- Begin from the front and work your way back. After that, go from side to side in a circular motion. Step 2: Take a top-to-toe measurement If you’d want to address it individually, go ahead and do so. Both the breadth and the length should be increased by ten inches.
- At this point, cut the material you’ll be working with to the specifications you recorded before.
- Our next step is to place the materials on our chair. Place your fabric on the chair. You decide which side of the right-hand column should be at the top. Finally, hide it in the nooks and crannies. Begin with the sides and work your way to the back, where they meet the seat, until you’ve finished. Take a safety pin and mark the middle of the front of the body.
- Begin with a safety pin and work your way around the chair. Straight pins may be used to secure the hems. Attach the ties to the front and back of the arms with straight pins for a fitted appearance. I’m sure you’ll find it fascinating.
- You may then remove the cover and fix the hems in place using upholstery pins. The corners should be pinned down to prevent them from swaying about. When pinning, you may hide your pins.
- Now that you’ve finished pining, you’ll have a nice cover in your hands. Return it to the chair and tuck the fabric in the same way you did previously.
- We must now maintain the fabric’s position. You’ll need cardboard tubes to achieve it. A PVC pipe may be substituted if that is not available to you. It doesn’t matter whether you’re using cardboard or PVC pipe, you’ll need three of each material. Since the chair’s breadth must be taken into consideration, that first piece must be four inches shorter. Each of the other two must be four inches shorter than the seat’s overall depth.
- Rubber bands should be placed at the end and in the center of the cardboard tube or PVC. Place the PVC or cardboard tube on top of the cloth now. Using the chair’s back and sides as focal points, tuck them into the spaces surrounding it. Now, press the PVC or cardboard tubing to the very end until it snaps shut on its own. The fabric will remain in place and appear tidy once you’ve done that.
- Now, gently fold the cloth. That includes the front and back of the chair’s arms. Ties may be used to keep the cloth in place.
- Wrap the cushion with a piece of cloth at the end. Use safety pins to fasten it to the cushion and the base of the chair.
Straight Chairs: How To Make Chair Covers Without Sewing
To manufacture straight chairs coverings, just follow these easy instructions.
The following are things you’ll need:
- Using a piece of tape, measure the distance.
- Pins with safety clasps
- Scissors
- Pins for reupholstery
How To Proceed: How To Cover A Chair Cushion Without Sewing
- In order to begin, you’ll need to measure the chair. For the chair coverings, you’ll need a length of cloth of this length. Begin at the bottom of the front and work your way up. Using a tape measure, measure the back from bottom to top, including the seat. To account for the hem allowance, add two inches. Margin mistakes will be eliminated by using inches instead of feet and inches. When pinning the fabric, margin errors are not uncommon.
- Next, locate the chair’s broadest portion. If at all feasible, take a glance between the person’s front legs or anywhere else looks acceptable. Once again, add two inches to acquire the fabric’s required width. Keep in mind that the width of the chair is determined by the kind of chair being used. Due to their size, some people need a larger figure than others.
- After each stage, I hope you’re taking your measurements and putting them in a log. Using the measurements you made before, cut out the cloth. Make a cut at this point.
- Our next step is to fold the cloth. Fold all four sides to a depth of less than 14 inch. An iron may be used to iron out the creases. If at all feasible, they should be flat.
- Now, remove your cover and set it on the chair, as instructed. Check the top right side that you need. Pin the fabric in place using your safety pins. Attach it to the rear of the chair at the point where the seat and back meet. At this point, the chair should have a good grip on the cloth.
- Now let’s focus on the fabric’s edges. Pin the folds to hold them in place after raising them an additional 3/8 of an inch. Move the pins that hold the rear and front together to conclude the job. The folds ought to be as flat as possible.
- We don’t need to sew, so we can use upholstery pins to hold the fabric’s edges in place. Remove the chair cover to make adjustments. The upholstery pins may be used to tighten the pins along the seams. They need to be as tight and hard as they can be. Additionally, a tidy and spotless appearance is required.
- Position the cover on the chair after it’s in place. Again, make sure the correct side is facing up. To achieve a seamless appearance, evenly distribute the fabric. In order to get good pinning, it’s important to make sure the fabric is evenly distributed. To keep your cloth in place, use upholstery pins. Make it as tidy and tight-fitting as you can. Upholstery pins keep the pleats in place if you want a cleaner appearance at the back. In order for an attractive appearance, conceal the upholstery pins.
- A wind band may be used to tie a piece of cloth around the chair at this point, if desired. Make a bow out of it by tying it. It’s up to you whether you want to play around with it and knot a different fabric. That’s going to have some stunning results.
- A clean chair cover may be achieved if you follow the aforementioned methods. With that said, it is a straightforward procedure.
Frequently Asked Questions (FAQ’s)
What kind of material is utilized to make chair covers?
Chair covers made of polyester are made in the form of chairs and have seams around the top of the backrest and along the seat so that they may be easily draped over banquet chairs or normal folding chairs. Polyester is a strong material that does not absorb stains and does not wrinkle easily; thus, it is an excellent option for budget-conscious do-it-yourself brides and event planners.
How do you use the out of a pillowcase to construct a chair cover?
· The pillowcase has to be washed and dried.
· The pillowcase has to be ironed.
· Place the opening of the pillowcase over the back of the folding chair, and then slip the pillowcase two-thirds of the way over the chair. This will allow the pillowcase to cover the back of the folding chair as well as the majority of the gap between the back and the seat.
Conclusion
Chair coverings may be made without sewing, despite popular belief. You don’t have to continually replace your replacement supplies and specialists in order to save money. Yes, pins can hold things in place, even if you don’t know it. Chair coverings may endure a long time if they are properly cared for. Again, take your time when creating the chair covers so that you can produce a high-quality product. The proper reading can only be obtained with a little amount of attention. Straight chairs and armchair coverings are simple to manufacture using the instructions provided above.
