How to Use Large Spools of Thread on Sewing Machine
Most sewers aren’t satisfied with the little spool of sewing thread that can fit in sewing machines. Several huge spools of thread are required to complete a single job. Using a big spool of cone thread on your sewing machine is easy if you know how to do it.
How to use large spools of thread on sewing machine? Large spools may be used in four distinct ways. Whether you’re using an actual spool or an improvised one, there are many options available to you.
When you have a huge spool of thread, there’s no need to purchase a slew of little spools of thread. Continue reading to find out how to make sewing more fun and efficient by using a big spool.
Table of Contents
How to Sew with a Large Thread Spool
Many sewers, especially novices, question whether their machines can handle enormous spools of thread. The answer is yes.
When sewing with a big spool of cone thread, the best and most convenient method is to utilize a spool holder. Also, you may reduce the size of the sewing machine by converting the huge spool to a smaller one.
Having spool holders on hand will make your work more efficient. A lot of thread is needed for even a simple sewing activity like making a garment.
If you’re using the sewing machine’s small-size threads, you’ll have to continually pausing to swap out the threads. Avoid wasting time by using a big spool. Spool holders are required when you’re working with a big spool instead of a smaller one, therefore you’ll need one.
A spool holder sits outside the sewing machine. Usually, after securing your big cone thread, you may begin to thread your sewing machine. It will guarantee that your sewing job will go off without a hitch.
A spool holder is made up of three main parts:
Thread is held in place by a hook as it moves to the sewing machine. When you are sewing, you don’t want anything to come in the way of your progress.
For maximum convenience and efficiency, you should always keep your spools in the proper position when stitching.
The Spool of Thread Should Be Located On the Floor
One approach to make frequent use of it is to leave a big spool of thread on the floor. With this thread, you won’t have a problem getting it to your system.
The spool will not fall since the floor is a table. Pull the thread over a chair to ensure smooth movement and accurate threading and sewing angles.
Assemble Your Own Spool Holder Out Of Scrap Materials
Because you don’t have to purchase another spool holder to thread huge spools, you save time and money. You may be able to assemble one with items already in your home.
One of the simplest ways to make spool holders is to use a mug from your kitchen. Place your spool in a cup that you can get from the kitchen and put it away until you need it. When sewing, you don’t want your spool to tumble out of your hands.
Alternatively, you may create a DIY spool holder out of wire. Make sure it has a portion where the thread may pass through when it connects to the sewing machine. Stabilize the wire by affixing a base to it.
DIY spool holders may be built at home for a fraction of the price. You’ll be able to find everything you need at home to create them.
The Large Spool Can Be Used
If your work space is big enough, you may use your huge spool of thread directly. Make a precise pass behind the sewing machine’s head with the cone thread.
Feed the sewing machine by wrapping the thread around the bobbin winder. Because your sewing machine is connected directly to a huge spool, you won’t have to stop working. It’s now possible to complete a big sewing job without having to replace thread spools that have run out.
Reduce the Size Of The Big Spool By Using A Smaller Spool
It’s also possible to move the thread from one spool to another. A simple pre-sewing method is available.
That way, your sewing machine will function as it was designed. You won’t have to worry about threads interfering with your job.
Using a smaller spool means you may have to take frequent breaks and re-thread. As soon as the thread on your little spool runs out, start this project.
You have the option of doing this manually, but you don’t have to. You may also use your bobbin winder to wind some thread onto your small thread spool.
When you begin stitching, the machine will take care of the rest. Stop when your thread spool is full. You don’t have to spend time moving each time your threads are ended if you make many little spools.
Tips for Using a Thread Spool
Sewing machines come with a profusion of threads from which to pick. Threads come in a wide variety of forms. The spools may also be coiled in a number of ways, and they come in a wide range of sizes and shapes, too.
Look at how a spool is constructed before we discuss the best methods for attaching it to your sewing machine. Cross-wound or stacked threads are the most common methods of wrapping threads for sewing projects.
Cross-Wound Spools of Thread
Cross-wound thread creates a “X” pattern on the spool. Look for spools with different-sized ends; some have a bigger end, while others have a larger and smaller end. Even if your sewing machine cannot accommodate cross-wound thread cones, you may use them.
How to Mount Cross-Wound Threads
Feeding cross-wound threads from one end of the spool is preferable. Use a free-standing thread stand and the horizontal spool pin on your sewing machine. However, you must ensure that they may be used with cross-wound spools. A sewing machine-mounted thread stand may also be used.
If you want to place cross-wound thread on your vertical spool pin, you’ll need a foam cushion and spool cover.
Then, lay the foam pad on the spool pin, with the foam side facing the thread spool, and secure it with a rubber band. Using the foam cushion during sewing keeps the thread from becoming tangled up in the spool of thread.
If the thread spool has a large and a tiny end, place the larger end on the rear of the spool pin.
It is essential that you use an appropriately-sized thread-end spool cap. The thread cap should be able to keep the spool firmly in place since there is no space between the thread cap and the spool. The cross-wound spool has now been securely mounted. A thread stand that stands alone may also be used.
Place the thread stand at the end of your machine. Either the right or the rear are acceptable placements.
You’ll need to start by using the thread guide on the horizontal spool pin to begin threading your needles. It is now time to begin sewing!
Assorted Spools of Thread
Thread is wrapped around spools in such a way that each row is stacked on top of the previous one. The spool’s ends are parallel to the lines it produces. On both ends, stacking thread spools are almost identical.
Thread Mounting: A Step-by-Step Guide
Spool-fed stacking thread functioned best when it was spun freely as it unwound from the side of the spool. Thread stands that may be attached to sewing machines are available, as well as a variety of other options, such as free-standing stands and sewing machine-mounted stands.
The vertical spool pin incorporated with your machine may be used to attach a stacked thread spool.
Avoid having the thread come off the spool and loop around the pin beneath the spool. Using a foam cushion at the base of the spool pin is an effective method.
Place the spool on top of the spool pin and make sure it can move freely while you’re drawing thread from the spool. Sticky labels may cause the spool to become caught on the pin when stitching.
The pin does not require a spool cover. While sewing, the thread spool will remain on the foam pad due to gravity.
A thread stand that allows you to stack spools is also a good option. It is possible to rotate the spool pin of Superior Threads from horizontal to vertical. Thread may be wrapped on and off the spool in this manner.
The only time a spool cover is needed is to prevent the spool from slipping off the horizontal spool pin during installation. Start by threading the top thread guide through the machine at the flat spool pin at the machine’s end. You may now begin stitching!
Frequently Asked Questions (FAQ’s)
What part of a sewing machine’s arm holds the thread in place?
A. It is a little metal ring that sits on the sewing machine’s face. Thread is held in place and guided from the spool to a needle by this device.
What is a spool holder?
A. A spool holder is a device that holds spools of yarn. On the pins of one or more sewing-thread stands are spools of thread, which may be turned freely as they are unwound. Stand for reels of thread noun Spools are put on skewers on a creel in warping.
Where would you place the thread spool before sewing?
A. Pull threads 3 to 4 inches under and back behind the presser foot before sewing.
Where do you put the thread spool?
A. Place your thread spool on the spool pin at the top of the sewing machine. The thread should be freed by rotating the spool counter-clockwise. Before inserting your thread spool, look for a schematic on the machine’s top.
Which direction should thread be removed from the spool?
A. Sewing machines with vertical spool pins work best with stacked thread. In order for the thread to exit the spool in the same direction in which it was coiled, it must be angled RIGHT. This will prevent the thread from tangling in the spool’s grooves.
Conclusion
If you’re decorating on a budget, sewing gives you more control over your spending. To be creative, you need to make basic apparel. If you know what you’re doing, it’s a lot of fun. Large thread spools make sewing more enjoyable since you don’t have to constantly change threads.
