How Do You Change The Walking Foot On A Janome Sewing Machine?

Fact Checked By:Aithley Balder

Post Updated On:

w3onlineshopping.com

w3onlineshopping.com

As an Amazon Associate I earn from qualifying purchases.

A walking foot is a useful accessory for many sewing projects, especially for materials that tend to slip or shift while sewing. Changing the walking foot on a Janome sewing machine can seem daunting, but it is a simple process that can be accomplished with the right tools and a little know-how. In this article, we will provide a step-by-step guide to changing the walking foot on a Janome sewing machine, as well as tips and common questions and answers to help you through the process. Whether you are a beginner or an experienced sewer, this guide will help you change your walking foot with confidence and ease.

How Do You Change the Walking Foot on a Janome Sewing Machine

The process of changing the walking foot on a Janome sewing machine can vary depending on the model. Here is a general guide to changing the walking foot:

  • Turn off the machine and raise the presser foot.
  • Remove the screw that holds the current presser foot in place. This is typically located at the back of the presser foot holder.
  • Remove the current presser foot and set it aside.
  • Take the new walking foot and place it in the presser foot holder, aligning the screw hole with the screw on the presser foot holder.
  • Secure the walking foot in place by tightening the screw.
  • Lower the presser foot and turn on the machine.
  • Test the walking foot by sewing a few stitches to make sure it is properly installed and functioning correctly.

It is recommended to refer to the owner’s manual for your specific Janome sewing machine for detailed instructions and any additional information. If you are unsure about changing the walking foot, it is best to seek the assistance of a professional.

TIPS:

Here are some tips for changing the walking foot on a Janome sewing machine:

  • Read the manual: Before attempting to change the walking foot, make sure to read the owner’s manual for your specific Janome sewing machine. This will provide you with detailed instructions and any additional information you need to change the walking foot correctly.
  • Gather the necessary tools: You will need a screwdriver to remove and replace the screw that holds the presser foot in place. Make sure you have the correct screwdriver for your machine before starting the process.
  • Turn off the machine: Always turn off the sewing machine and unplug it before changing the presser foot. This will ensure your safety and prevent any damage to the machine.
  • Raise the presser foot: Raise the presser foot before removing the screw. This will make it easier to access the screw and remove the presser foot.
  • Tighten the screw securely: Make sure to tighten the screw securely to hold the walking foot in place. This will ensure that the walking foot functions properly and does not come loose while you are sewing.
  • Test the walking foot: After installing the new walking foot, test it by sewing a few stitches. This will help you confirm that the walking foot is properly installed and functioning correctly.

By following these tips, you can change the walking foot on your sewing machine with confidence and ease.

Frequently Asked Questions (FAQ’s)

Here are some common questions and answers on changing the walking foot on a Janome sewing machine:

Q: What is a walking foot used for?

A: A walking foot, also known as an even feed foot, is used to sew multiple layers of fabric or slippery materials evenly. It has built-in feed dogs that work in conjunction with the machine’s feed dogs to move the top layer of fabric at the same rate as the bottom layer, preventing shifting, puckering, or uneven feeding. The walking foot is particularly useful for quilting, sewing leather or vinyl, sewing velvet or other pile fabrics, and working with difficult-to-handle fabrics.

Q: What tools do I need to change the walking foot on my Janome sewing machine?

A: You will need a screwdriver to remove and replace the screw that holds the presser foot in place. Make sure you have the correct screwdriver for your machine before starting the process.

Q: Is it necessary to turn off the machine before changing the walking foot?

A: Yes, it is important to turn off the machine and unplug it before changing the walking foot. This will ensure your safety and prevent any damage to the machine.

Q: What should I do if I am unsure about changing the walking foot?

A: If you are unsure about changing the walking foot, it is best to seek the assistance of a professional. You can also refer to the owner’s manual for your specific Janome sewing machine for detailed instructions and any additional information.

Q: How do I know if the walking foot is properly installed?

A: After installing the walking foot, test it by sewing a few stitches. This will help you confirm that the walking foot is properly installed and functioning correctly.

Q: Can I use any walking foot with my Janome sewing machine?

A: Not all walking feet are compatible with all sewing machines. Make sure to choose a walking foot that is specifically designed for your Janome sewing machine.

Q: Can I use a regular presser foot instead of a walking foot?

A: While a regular presser foot can be used for many sewing projects, it may not be as effective as a walking foot when working with multiple layers of fabric or slippery materials. The walking foot’s built-in feed dogs help ensure even feeding of the fabric layers, reducing the chance of shifting or puckering. For projects that require precise stitching and even feeding, it is recommended to use a walking foot.

Q: Are walking feet universal for all Janome sewing machine models?

A: Walking feet are not universal for all Janome sewing machine models. Different Janome models may require specific walking feet that are compatible with the machine’s design and mechanism. It’s important to check the compatibility of the walking foot with your specific Janome sewing machine model before making a purchase.

Q: Where can I purchase a walking foot for my Janome sewing machine?

A: You can purchase a walking foot for your Janome sewing machine from authorized Janome dealers, sewing supply stores, or online retailers that specialize in sewing machine accessories. Ensure that the walking foot you choose is compatible with your specific Janome machine model.

By considering these questions and answers, you can change the walking foot on your sewing machine with confidence and ease.

Conclusion

In conclusion, changing the walking foot on a Janome sewing machine is a simple process that can be accomplished with the right tools and a little know-how. By following the step-by-step guide provided in this article, you can change your walking foot with confidence and ease. Remember to turn off the machine and unplug it before changing the walking foot, and make sure to tighten the screw securely to hold the walking foot in place. If you are unsure about changing the walking foot, seek the assistance of a professional or refer to the owner’s manual for your specific Janome sewing machine. With the right tools and a little bit of patience, you can change your walking foot and get back to your sewing projects in no time.

Photo of author

Aithley Balder

Hello there, my name is Aithley Balder from Texas. I am a cookware, sewing, toilet, technology enthusiast and I have been sharing my passion with my friends and likeminded folks for close to 4 years now. Don’t hesitate to get in touch with me via the contact page.

Leave a Comment

For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.